LED Strip Lights Description:

LED strip lights are best suited for any indoor or outdoor Illumination project that requires customized colour or color changing effects. Led strip bulbs make an amazing addition to any residential or commercial environment that requires changing the mood and look of any space in a flash. They are cost effective, as well as quick and easy to install,

as they can easily be cut every 5 cm. The strips have separate RGB power inputs and common anode wire, which is much easier to both connect and power multiple strips. LED strip lights are clearly marked where to make these cuts.

LED Strip Lights are multiple uses
                                                                                              LED Strip Lights are multiple uses

LED Strip Lights features:

  • Epistar LED chip brand.
  • Painted FPC underlay.
  • High lifetime of over 50,000 hrs/3 years’ warranty.
  • Fast and easy installation with 3M adhesive tape.
  • Connected load: 4-8 w/m, 14.4 w/m
  • Protection rating: IP 20-65
  • No UV emission.
  • Wide viewing angle.
  • Low energy consumption.
  • High flexibility.
  • Can be cut every 5 cm.
  • 5 Meters per unit.
  • Operating temperature -25 to +80 dagrees Celsius.

LED Strip Lights Uses:

LED strip lights can be used almost everywhere, and in different ways for indoor and outdoor lighting. For example, they are great for ceiling, wall, ground, cabinet lighting, under cabinet lighting, showcase lighting, bookshelf lighting, cupboard lighting, or other indoor places where space is limited.

LED Strip Lights Attention:

  • They must always be disconnected before cutting or installing
  • The installer must wait at least one minute before connecting to a previously powered driver.
  • The strip must not be powered whilst in the packaging.
  • The LED strip must not be touched on its surface, as this may damge the strip.
  • Make sure that the system is linked to electrical service as outlined by local and national electrical codes
  • Installation of the luminaires should be carried out by the experienced persons who is well familiarized with the luminaires’ operation.
  • Wear appropriate safety equipment while installing or servicing luminaire.
  • Always verify that electric power is switched off before installing or servicing.
    Installation must be operated under the required voltage; never exceed the stated wattage as this could overheat the transformer.
  • Operation in opposition to guidelines might damage your property even harm to your personal safety

B-LED Products:

Comments (01)

  1. Hiya, I am really glad I’ve found this info. Nowadays bloggers publish just about gossips and net and this is actually irritating. A good web site with exciting content, this is what I need. Thank you for keeping this web site, I will be visiting it. Do you do newsletters? Can’t find it.

Comments are closed.

Contact Us

81 New Industrial Area, Doha, Qatar. PO. Box: 2943


We pride ourselves of producing quality, Qatari-manufactured LED lighting products, covering a range of industrial, commercial, municipal, and household uses where low energy consumption, environmental friendliness, color diversity and lighting control systems

Copyright © 2014 LED. Al Humidy  All rights reserved.

Add to cart